| Peer-Reviewed

The Effects of Counterparts on the Wear Properties and Surface Microstructure of TC4 Alloy

Received: 12 June 2015     Accepted: 18 June 2015     Published: 14 July 2015
Views:       Downloads:
Abstract

The wear properties and wear surfaces microstructure of TC4 alloy were studied with GCr15 and SiC counterparts, respectively. The results show that the friction coefficients of TC4 alloy with GCr15 was higher and the mass loss was lower compared with those of SiC. The wear mechanisms of TC4 alloy with GCr15 and SiC could be concluded as grinding abrasion, adhesion abrasion and oxidation abrasion. However, adhesion abrasion and oxidation abrasion mechanisms were predominant with GCr15 counterpart.

Published in Pure and Applied Mathematics Journal (Volume 4, Issue 5-1)

This article belongs to the Special Issue Mathematical Aspects of Engineering Disciplines

DOI 10.11648/j.pamj.s.2015040501.11
Page(s) 1-5
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2015. Published by Science Publishing Group

Keywords

TC4 Alloy, Counterparts; Wear Property, Surface Microstructure

References
[1] J.LUO, M Q LI, H. LI, W.X.YU, “High temperature deformation behavior of TC4 titanium alloy and its flows stress model” The Chinese Journal of Nonferrous Metals., 18(8)(2008), 1395-1401
[2] X. F.YAO, F.Q.XIE, Y. HAN Yong, G. X. ZHAO, “Effects of Temperature on Wear Properties and Friction Coefficient of TC4 alloy”, Rare Metal Materials and Engineering., 41(8) (2012),1463-1466
[3] Q. Ming, Y.Z. ZHANG, J.H YANG, J.ZHU, “Effects of Friction Heat on Tribological Properties ofTi6Al4V Alloy Sliding Against GCr15 Steel”,TRIBOLOGY., 26(3)(2006), 203-207
[4] Y. LIU, D.Z. YANG, S.Y.HE W.L.WU, “Study on Dry Sliding Wear of TC4 Alloy in Vacuum”, Rare Metal Materials and Engineering., 34(1)( 2005), 128-131
[5] A. Hojat A, D.Y Li, “Beneficial effects of yttrium on mechanical properties and high-temperature wear behavior of surface aluminized 1045 steel”, Wear., 255(2003), 933–942.
[6] C.J. ZHANG, J.ZHANG, “Effect of Chemical Composition and Cooling Method on Properties of TC4 Alloy”, Hot Working Technology., 41(8)(2012), 192-193
[7] A Klimpel, A Bobrzanski, A Lisiechi et al, “The study of the technology of laser and plasme surfacing of engine valves face made of x40CrSiMo10 steel using cobalt-based”, J Mater Process Technol., 175(2006):251-256
[8] M. Laribi, A B Vannes, D Trejeux, “Study of mechanical behavior of molydenum coating using sliding wear and impact tested”, Wear., 262(2007):1330-1336
[9] H L DU, P K Datta, R S BURNELL-GRAY, et al, “Influence of plasma-sprayed Mo coating on sulphidation behaviour of Inconel600 and Nimonic PEⅡ alloys”, Surf Coat Technol., 76-77(1995): 1-6
[10] Z LI, S S LIU, Z Y CHEN, “Study on plasma discharge parameters in double-glow plasma surface alloying furnace”, Vacuum, 83(2009):801−804.
Cite This Article
  • APA Style

    Guo Bao hui. (2015). The Effects of Counterparts on the Wear Properties and Surface Microstructure of TC4 Alloy. Pure and Applied Mathematics Journal, 4(5-1), 1-5. https://doi.org/10.11648/j.pamj.s.2015040501.11

    Copy | Download

    ACS Style

    Guo Bao hui. The Effects of Counterparts on the Wear Properties and Surface Microstructure of TC4 Alloy. Pure Appl. Math. J. 2015, 4(5-1), 1-5. doi: 10.11648/j.pamj.s.2015040501.11

    Copy | Download

    AMA Style

    Guo Bao hui. The Effects of Counterparts on the Wear Properties and Surface Microstructure of TC4 Alloy. Pure Appl Math J. 2015;4(5-1):1-5. doi: 10.11648/j.pamj.s.2015040501.11

    Copy | Download

  • @article{10.11648/j.pamj.s.2015040501.11,
      author = {Guo Bao hui},
      title = {The Effects of Counterparts on the Wear Properties and Surface Microstructure of TC4 Alloy},
      journal = {Pure and Applied Mathematics Journal},
      volume = {4},
      number = {5-1},
      pages = {1-5},
      doi = {10.11648/j.pamj.s.2015040501.11},
      url = {https://doi.org/10.11648/j.pamj.s.2015040501.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.pamj.s.2015040501.11},
      abstract = {The wear properties and wear surfaces microstructure of TC4 alloy were studied with GCr15 and SiC counterparts, respectively. The results show that the friction coefficients of TC4 alloy with GCr15 was higher and the mass loss was lower compared with those of SiC. The wear mechanisms of TC4 alloy with GCr15 and SiC could be concluded as grinding abrasion, adhesion abrasion and oxidation abrasion. However, adhesion abrasion and oxidation abrasion mechanisms were predominant with GCr15 counterpart.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - The Effects of Counterparts on the Wear Properties and Surface Microstructure of TC4 Alloy
    AU  - Guo Bao hui
    Y1  - 2015/07/14
    PY  - 2015
    N1  - https://doi.org/10.11648/j.pamj.s.2015040501.11
    DO  - 10.11648/j.pamj.s.2015040501.11
    T2  - Pure and Applied Mathematics Journal
    JF  - Pure and Applied Mathematics Journal
    JO  - Pure and Applied Mathematics Journal
    SP  - 1
    EP  - 5
    PB  - Science Publishing Group
    SN  - 2326-9812
    UR  - https://doi.org/10.11648/j.pamj.s.2015040501.11
    AB  - The wear properties and wear surfaces microstructure of TC4 alloy were studied with GCr15 and SiC counterparts, respectively. The results show that the friction coefficients of TC4 alloy with GCr15 was higher and the mass loss was lower compared with those of SiC. The wear mechanisms of TC4 alloy with GCr15 and SiC could be concluded as grinding abrasion, adhesion abrasion and oxidation abrasion. However, adhesion abrasion and oxidation abrasion mechanisms were predominant with GCr15 counterpart.
    VL  - 4
    IS  - 5-1
    ER  - 

    Copy | Download

Author Information
  • School of Physical and Electronic Engineering, Wei Nan Normal University, Wei Nan, ShaanXi, P. R. China

  • Sections